GeneralAluminum Construction
- Original design vents and resists contamination.
Window
- Lightweight, strong, durable, non-corrosive and weather-resistant.
- Allows for rapid heat dissipation.
- Solid one-piece construction WILL NOT BREAK...
- Unique design reinforces hub cap face and eliminates window breakage.
Manufactured from chemical and break-resistant Lexan. Guaranteed against breaking or leaking for the LIFE of the product. Mounting Gaskets Patented Venting System
- Highly crush-resistant at high flange pressures.
- Gaskets have a FULLY CURED nitride binder which will withstand wheel-end temperatures up to 350 degrees.
Allows for two-way air movement while protecting the wheel end from outside contaminants. Designed to relieve wheel-end pressure and vacuum buildup. Provides excellent protection from water-filled loading docks and high-pressure sprayers. Patented cover protects sintered bronze vent from becoming contaminated with grease from inside the wheel end. Sintered bronze vent is nickel plated for exceptional corrosion resistance. Prevents oil from migrating out of the wheel end.
| PART NUMBER | NO. OF BOLTS | HOLE SIZE | BOLT CIRCLE | I.D. (B) | O.D. (A) | MAX AXLE EXTD. (C) | HEIGHT (D) | CROSS REFERENCE STEMCO | CROSS REFERENCE CR |
|
DG-6P DG-5/6P DG-7.5P DG-P |
6 5 and 6 6 Threaded |
0.37 0.34 0.37 N/A |
5.5 5.5 6.75 N/A |
4.43 4.37 5.45 5.63 |
6.25 6.25 7.5 6.43 |
2.17 1.74 2.12 1.63 |
2.81 2.42 2.75 3.17 |
340-4009 340-4013 340-4195 340-4075 |
1643 1642 1696 1682 |
|
DG-6PS DG-5/6PS DG-7.5PS DG-PS |
6 5 and 6 6 Threaded |
0.37 0.34 0.37 N/A |
5.5 5.5 6.75 N/A |
4.43 4.37 5.45 5.63 |
6.25 6.25 7.5 6.43 |
2.17 1.74 2.12 1.63 |
2.81 2.42 2.75 3.17 |
343-4009 343-4013 343-4195 343-4075 |
1643 1642 1696 ---- |
|
DG-6FP DG-6F4.5P DG-6FPS DG-6F4.5S |
6 6 6 6 |
0.34 0.34 0.34 0.34 |
5.5 4.5 5.5 4.5 |
4.37 3.5 4.37 3.5 |
6.25 5.25 6.25 5.25 |
1.71 1.85 1.71 1.85 |
2.4 2.45 2.4 2.45 |
347-4009 343-4013 ---- 347-4075 |
1643 1612 ---- 1612 |
|
DG-6PSC DG-6FPC DG-PSC DG-6F4.5PC |
6 6 Threaded 6 |
0.37 0.34 N/A 0.34 |
5.5 5.5 N/A 4.5 |
4.43 4.37 5.63 3.5 |
6.25 6.25 6.43 5.25 |
2.17 1.71 1.63 1.85 |
2.81 2.4 3.17 2.45 |
340-4046 340-4024 343-4249 343-4024 |
---- ---- ---- ---- |
All surface areas should be clean. Once hub cap and gasket are bolted into place, torque bolts in a crisscross order to 15-20 ft-lb.Screw-on hub caps:
All surface areas should be clean. Lubricate O-ring seal with gear lube currently being used in the hub cap. Screw on and tighten to 60 ft-lb.
|
Dual Dynamics, Inc. warrants the Dual-Guard System to be free from defects in materials and workmanship, and free from leakage for the life of the product. Complete warranty information is included with each product. |